EDITION 04/2012
OPERATING MANUAL
8.2
CLEANING THE PARTS AFTER DISASSEMBLY
Please note:
➞ All reusable parts (except for the electrical components) should be cleaned
thoroughly using a suitable cleaning agent.
➞ The end piece, plug compl. and the handle inside must be clean and dry after
cleaning. Care should be taken that these parts remain free of solvents, grease or
sweat from the hands (salt water).
➞ Spare parts may have safety-relevant properties.
➞ Defective parts, O-rings and seal sets must always be re-placed.
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gasses
SIHI_0060_GB
In chapter 12 can be found part numbers for gun spare parts as well as for wearing parts
such as seals.
PART NO. DOC2321362
ATTENTION
Check the compatibility of cleaning agent and working medium
in accordance with safety data sheets.
AquaCoat GM 5000EACW
WARNING
74