Operation; Training The Operating Staff; Safety Instructions - WAGNER GM 5000EAC F Operating Manual

Electrostatic aircoat spray gun for manual operation and for flat or round jet nozzles
Hide thumbs Also See for GM 5000EAC F:
Table of Contents

Advertisement

EDITION 07/2014
OPERATING MANUAL
7

OPERATION

7.1

TRAINING THE OPERATING STAFF

Incorrect operation!
Risk of injury and equipment damage.
7.2

SAFETY INSTRUCTIONS

Incorrect operation!
Risk of injury and equipment damage.
Discharge of electrostatically charged components in atmospheres
containing solvents!
Explosion hazard from electrostatic spark-over.
ORDER NUMBER DOC 2344500
WARNING
The operating staff must be qualifi ed to operate the entire
system.
Before work commences, the operating staff must receive
appropriate training.
WARNING
If contact with solvent-based paints or cleaning agents causes
skin irritation, appropriate precautionary measures must be
taken, e.g. wearing protective clothing.
The footwear worn by operating staff must comply with
EN ISO 20344. The measured insulation resistance must not
exceed 100 MΩ.
The protective clothing, including gloves, must comply with
EN ISO 1149-5. The measured insulation resistance must not
exceed 100 MΩ.
WARNING
Use gun only with fi tted nozzle, air cap and union nut.
Tighten the union nut, especially with nozzle in the cleaning
position.
37

Advertisement

Table of Contents
loading

Table of Contents