Cleaning And Decommissioning - WAGNER GM 5000EAC F Operating Manual

Electrostatic aircoat spray gun for manual operation and for flat or round jet nozzles
Hide thumbs Also See for GM 5000EAC F:
Table of Contents

Advertisement

EDITION 07/2014
OPERATING MANUAL
8.1.3

CLEANING AND DECOMMISSIONING

The spray gun and the unit must be cleaned daily. The cleaning agents used for cleaning
must correspond with the working product.
Cleaning of the nozzle parts -> Chapter 7.3.7
Eliminating Nozzle Clogging -> Chapter 7.3.8
Flushing agent in the air duct!
Functional faults caused by swollen seals.
Never immerse the spray gun in cleaning agent.
Incorrect maintenance/repair!
Risk of injury and equipment damage.
ORDER NUMBER DOC 2344500
NOTICE
WARNING
Have repairs and part replacements be carried out only by
specially trained staff or a WAGNER service center.
Before all work on the device and in the event of work
interruptions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and device.
- Secure the spray gun against actuation.
Observe the operating instructions for any work.
46

Advertisement

Table of Contents
loading

Table of Contents