Table of Contents
Advertisement
VERSION 03/2018
10.4.3 CLEANING THE PARTS AFTER DISASSEMBLY
Please note:
All reusable parts (except for the parts conducting high voltage such as adapter etc.)
should be cleaned thoroughly using a suitable cleaning agent.
The adapter and all dismantled parts must be clean and dry after cleaning. Care should
be taken that these parts remain free of solvents, grease or sweat from the hands
(salt water). Clean and mount wearing gloves.
Spare parts may have safety-relevant properties.
Only repair and replace parts that are listed in the "Spare parts" chapter and that are
assigned to the unit.
Defective parts, O-rings and seal sets must always be re-placed.
WARNING
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gases.
Examine the compatibility of the cleaning agents and working media on the basis
of the safety data sheets.
In Chapter
14
the part numbers for gun spare parts can be found as well as for wearing parts
such as seals.
10.4.4 ASSEMBLING THE SPRAY GUN
Mounting materials
Order No.
2 *
9992698
4
9992511
* Use Vaseline sparingly
ORDER NUMBER DOC 2369735
Description
Vaseline white, PHHV II
Loctite® 243
92
Advertisement
Table of Contents
