EDITION 07/2014
OPERATING MANUAL
Surface spraying, electrostatics
Never spray device parts using electrostatic equipment (electrostatic spray gun!).
Medium supporting atomizing
To atomize the product, use only weakly oxidizing gases, e.g. air.
Cleaning
If there are deposits on the surfaces, the device may form electrostatic charges. Flames or
sparks can form during discharge.
Remove deposits from the surfaces to maintain conductivity.
Only use a damp cloth to clean the device.
3.3
PERMISSIBLE DEVICE COMBINATIONS
Incorrect use!
Risk of injury and equipment damage.
The GM 5000EAC manual spray gun may only be connected to the control units listed
below:
VM 500 control unit
VM 5000 control unit
ORDER NUMBER DOC 2344500
WARNING
Connect the GM 5000EAC manual spray gun only to original
Wagner control units.
12