Cleaning The Spray Gun And Replacing The Wearing Parts - WAGNER PEA-C4 Twin-HiCoat Operating Manual

Automatic powder spray gun
Table of Contents

Advertisement

Maintenance and cleaning
4.2

Cleaning the spray gun and replacing the wearing parts

3
2
1
Caution
Never place the spray gun or parts of the spray gun in cleaning agent!
Clean the parts removed and spray gun of powder residue.
As a rule you only need to check the protective wedge for wear and replace it as
necessary.
In the next section it is described how the protective wedge is to be dismantled and inserted.
09/2014
4
Unscrew the outer nut 1 from the spray gun housing 5 .
Pull the fan spray nozzle 2 off the electrode holder 3 .
5
Carefully pull the electrode holder 3 out of the spray
gun housing 5 .
Pull the protective wedge 4 out of the electrode holder
3 using narrow flat-nosed pliers.
peac4_0007
New protective wedge
Worn protective wedge:
390832
-
We recommended replacing the protective
wedge.
PEA-C4 Twin-HiCoat
040201_ .doc
040202_ .doc
17

Advertisement

Table of Contents
loading

Table of Contents