Table of Contents
Advertisement
VERSION 02/2018
OPERATING MANUAL
10.4.3 CLEANING THE PARTS AFTER DISASSEMBLY
Please note:
All reusable parts (except for the electrical components) should be cleaned thoroughly
using a suitable cleaning agent.
The adapter, plug, inside handle and all dismantled parts must be clean and dry after
cleaning. Care should be taken that these parts remain free of solvents, grease or
sweat from the hands (salt water). Clean and mount wearing gloves.
Spare parts may have safety-relevant properties.
Only repair and replace parts that are listed in the "Spare parts" chapter and that are
assigned to the unit.
Defective parts, O-rings and seal sets must always be re-placed.
WARNING
Incompatibility of cleaning agent and working medium!
Risk of explosion and danger of poisoning by toxic gases.
Examine the compatibility of the cleaning agents and working media on the basis of
the safety data sheets.
In Chapter
14
the part numbers for gun spare parts can be found as well as for wearing parts
such as seals.
ORDER NUMBER DOC 2366717
87
Advertisement
Table of Contents
