Table of Contents
Advertisement
EDITION 07/2014
OPERATING MANUAL
3
IDENTIFICATION
3.1
EXPLOSION PROTECTION IDENTIFICATION FM
C
US
This device has been manufactured and tested by FM, according to the FM (Factory Mutual)
standard "Class Number 7260" (Approval Standard for Electrostatic Finishing Equipment).
All tested combinations of devices including accessories are given in the FM Control
Document with part number 2316160.
3.2
INFORMATION FOR SAFE AND CORRECT OPERATION
Maximum surface temperature
Maximum surface temperature: 85 °C; 185 °F
Maximum permissible product temperature: 50 °C; 122 °F
Permissible ambient temperature: 0 to +40 °C; +32 to +104 °F
Safety instructions
Safe handling of WAGNER spray devices
Mechanical sparks can form if the device comes into contact with metal.
In an explosive atmosphere:
Do not knock or push the unit against steel or rusty iron.
Do not drop the spray gun.
Only use tools that are made of a permitted material.
Ignition temperature of the coating product
Ensure that the ignition temperature of the coating material is above the maximum
surface temperature.
ORDER NUMBER DOC 2344500
For Electrostatic Finishing Applications
using Class I, Group D, Spray Material
In accordance with 2316160
11
Advertisement
Table of Contents
