Maintenance; Maintenance Staff; Safety Instructions - WAGNER GM 5000EAC F Operating Manual

Electrostatic aircoat spray gun for manual operation and for flat or round jet nozzles

Hide thumbs Also See for GM 5000EAC F:

Table of Contents

EDITION 07/2014

OPERATING MANUAL

8.2

MAINTENANCE

8.2.1

Maintenance work should be undertaken regularly and carefully by qualifi ed and trained

staff . They should be informed of specifi c hazards during their training.

The following hazards may arise during maintenance work:

Health hazard from inhaling solvent vapors

Use of unsuitable tools and aids

Once the maintenance work is complete, the device must be checked by a qualifi ed person

to ensure a reliable condition.

8.2.2

Incorrect maintenance/repair!

Danger to life and equipment damage.

Check hoses, pipes, and couplings every day and replace if necessary.

In accordance with the guideline for liquid ejection devices (ZH 1/406 and BGR 500

Part 2 Chapter 2.36):

- The liquid ejection devices should be checked by an expert (e.g. Wagner service

technician) for their safe working conditions as required and at least every 12

months.

- If devices have been decommissioned, the examination can be suspended until the

next start-up.

ORDER NUMBER DOC 2344500

DANGER

Repair or replacement of devices or parts of devices are only

allowed to be performed outside the hazard area by qualifi ed

personnel.

Table of Contents