Table of Contents
Advertisement
AT-SBx908 GEN2 Installation Guide for Virtual Chassis Stacking
Adjusting the Equipment Rack Brackets
The chassis comes with two pre-installed equipment rack brackets. The
default positions of the brackets align the front of the chassis with the front
of the equipment rack. You can re-position the brackets on the sides of the
chassis to have the device extend in front of the rack. Figure 31 here and
Figure 32 on page 84 and Figure 33 on page 85 show the various bracket
and chassis orientations. The first illustration in Figure 31 shows the
default positions of the brackets.
Figure 31. Chassis Orientations in the Equipment Rack
83
Advertisement
Table of Contents
