Table of Contents
Advertisement
AT-SBx908 GEN2 Installation Guide for Virtual Chassis Stacking
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3
Warning
Class I Equipment. This equipment must be earthed. The power
plug must be connected to a properly wired earth ground socket
outlet. An improperly wired socket outlet could place hazardous
voltages on accessible metal parts. E4
Note
Pluggable Equipment. The socket outlet shall be installed near the
equipment and shall be easily accessible. E5
Caution
Air vents must not be blocked and must have free access to the
room ambient air for cooling. E6
Warning
Operating Temperatures. This product is designed for a maximum
ambient temperature of 50° degrees C. E52
Note
All Countries: Install product in accordance with local and National
Electrical Codes. E8
Warning
When installing this equipment, always ensure that the frame ground
connection is installed first and disconnected last. E11
Warning
Only trained and qualified personnel are allowed to install or replace
this equipment. E14
69
Advertisement
Table of Contents
