Figure 27: Pre-Installed Items On The Rear Panel - Allied Telesis AT-SBx908 Installation Manual

1. One ground wire lug
Note
You should retain the original packaging material in the event you
need to return the unit to Allied Telesis.
Note
The product does not come with power supplies. Power supplies
must be ordered separately.
5. Remove the accessory kit from the shipping box and verify its
components, listed in Figure 28 on page 78.
AT-SBx908 GEN2 Installation Guide for Virtual Chassis Stacking
2
1
Figure 27. Pre-installed Items on the Rear Panel
2
2. Two AT-FAN08 Fan
Modules
77