Figure 95: Aligning The Fan05 Module In The Switch Slot; Figure 96: Seating The Fan05 Module On The Internal Connector - Allied Telesis x950 Series Installation Manual

Figure 95. Aligning the FAN05 Module in the Switch Slot
3. When you feel the module make contact with the internal connector,
gently press on both sides to seat the module on the connector. Refer
to Figure 96.
Figure 96. Seating the FAN05 Module on the Internal Connector
4. Tighten the two screws on the module to secure it to the switch. Refer
to Figure 97.
x950 Series Installation Guide for Stand-alone Switches
155