Setting The Profibus Address; Configuring The Example; Configuring S7-400 - Siemens SIMATIC ET 200iSP Operating Instructions Manual

2.8

Setting the PROFIBUS address

Setting the PROFIBUS address
Set PROFIBUS address 3 on the interface module IM 152.
Figure 2-5
See also
Setting the PROFIBUS address (Page 131)
2.9

Configuring the Example

2.9.1

Configuring S7-400

Step 1
Open STEP 7.
Step 2
If the New Project Wizard opens, close it with Cancel.
Step 3
Go to the main menu of the SIMATIC Manager and select File > New. A dialog box opens in
which you enter "ET 200iS" as the name and then close the dialog with OK.
ET 200iSP
Operating Instructions, 11/2017, A5E00247483-07
Setting PROFIBUS address 3
Commissioning guideline
2.9 Configuring the Example
35