Address Space Of The Inputs And Outputs; Digital Input Module - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Appendix
A.4 Address space of the inputs and outputs
t
2
t
3
A.4

Address space of the inputs and outputs

A.4.1

Digital input module

8 DI NAMUR
The address range of the process input and output image that is assigned is dependent on
the configuration, in other words, by the selection of the relevant entry in the engineering
software.
8 DI NAMUR with "8 DI NAMUR" configuration
● Assignment of the process input image (PII)
Figure A-10
● Assignment of the process output image (POI)
The POI is not assigned.
348
Output value applied and coverted
Specified output value reached
PII with "8 DI NAMUR" configuration
Operating Instructions, 11/2017, A5E00247483-07
ET 200iSP