Siemens SIMATIC ET 200iSP Operating Instructions Manual page 40

Commissioning guideline
2.9 Configuring the Example
At channels 0 and 1 change the sensor type to "NAMUR sensor." Select "disabled" for all other
channels.
Figure 2-8
Step 4
Follow the same procedure as described in item 3 for each of the ET 200iSP modules, and
make the changes as outlined in the table below.
Table 2-2 Changes
Module Slot Type
1 4 8 x DI NAMUR
2 5 8 x DI NAMUR
3 6 4 x DO
4 7 4 x DO
5 8 4 x DO
Step 5
Save the configuration with File > Save and download it to the CPU withPLC > Download.
40
Disabling ET 200iSP Channels
Channel 0
NAMUR sensor
NAMUR sensor
No change
No change
No change
Channel 1
NAMUR sensor
Sensor type: Channel dis‐
abled
No change
No change
No change
Operating Instructions, 11/2017, A5E00247483-07
Channel 2- 7
Sensor type: disabled
Sensor type: disabled
---
---
---
ET 200iSP