Siemens SIMATIC ET 200iSP Operating Instructions Manual page 305

Slot reference junction 2
Input reference junction 2
● Parameters relevant for 4 AI RTD and 4 AI TC:
8 (4 AI RTD)
11 (4 AI RTD)
15 (4 AI TC)
22 (4 AI TC)
32 (4 AI TC)
Non-isolated thermocouples
When you use non-isolated thermocouples, you must comply with the permitted common-
mode voltage.
ET 200iSP
Operating Instructions, 11/2017, A5E00247483-07
Parameter
Slot
Type/range of measurement I0
Type/range of measurement I1
Reference junction I0
Reference junction I1/I2/I3
Reference junction number
Measuring range I0
Measuring range I1/I2/I3
Reference junction I0/I1
Reference junction I2/I3
Reference junction number
Measuring range I0/I1
Measuring range I2/I3
Reference junction I0
Reference junction I1
Reference junction I2/I3
Reference junction number
Measuring range I0
Measuring range I1
Measuring range I2/I3
13.9 Fundamentals of analog value processing
11
RTD on channel 1
Parameter
RTD-4 wire connection/ Pt 100
climatic range
RTD-4 wire connection/ Pt 100
climatic range
Yes
None
2
Type...
(any)
Yes
None
1
Type...
(any)
None
Yes
None
1
(any)
Type...
(any)
Analog electronic modules
Value
Value
305