Hart Warning; Hart Diagnostics - Siemens SIMATIC ET 200iSP Operating Instructions Manual

13.12.6

HART warning

Description
If you enable this parameter, a diagnostic interrupt will be triggered in response to the following
HART warnings (see the "Electronic module error types" table):
● HART further status available
● HART configuration changed
13.12.7

HART diagnostics

Description
If you enable this parameter, a diagnostic interrupt will be triggered in response to the following
HART diagnostics (see the "Electronic module error types" table):
● HART analog output current specified
● HART analog output current saturated
● HART communication error
● HART primary variable outside the limits
● HART auxiliary variable outside the limits
ET 200iSP
Operating Instructions, 11/2017, A5E00247483-07
13.12 Parameter description of the analog electronic modules
Analog electronic modules
327