Siemens SIMATIC ET 200iSP Operating Instructions Manual page 102

Installing
4.6 Installing the Slot Number Labels
Installing the slot number plates
1. Break off the slot number plates (1 to 34) from the strip.
2. Use your finger to press the slot number plates into the terminal module.
Figure 4-13
Removing slot number plates
1. Remove the electronic module from the terminal module.
2. Using the screwdriver, lever the slot number plate carefully from below out of the bracket.
102
①
Slot number plates
Installing the slot number plates
Operating Instructions, 11/2017, A5E00247483-07
ET 200iSP