Siemens SIMATIC ET 200iSP Operating Instructions Manual page 149

Note
The ET 200iSP supports the default startup.
The following conditions then apply:
● Transferred parameters are saved and used after the supply voltage is switched on at the
Power Supply PS.
● The configuration can be performed with the General Identification Format according to the
PROFIBUS standard.
See also
General Rules and Regulations for Wiring (Page 103)
ET 200iSP
Operating Instructions, 11/2017, A5E00247483-07
Commissioning and Diagnostics
6.7 Commissioning and starting up the ET 200iSP
149