Status And Error Leds On The Et 200Isp - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Commissioning and Diagnostics

6.6 Status and error LEDs on the ET 200iSP

Assignment of the inputs and value status in the PII
Each channel of the module is assigned a value status in the process image of the inputs. You
can find the assignment at "AUTOHOTSPOT".
Evaluation of the value status in PCS 7
The value status is evaluated by means of the PCS 7 channel driver.
1. The PCS 7 channel drivers reads the value status from the process image of the inputs...
2. ... and forms the quality code for PCS 7 from this.
Reference
For a detailed description of the evaluation and processing of the relevant input signals, refer
to the PCS 7 documentation
10806846/130000).
See also
Digital input module (Page 348)
6.6 Status and error LEDs on the ET 200iSP
Interface module IM 152
SF
BF
ACT
ON
PS1
PS2
142
(http://support.automation.siemens.com/WW/view/en/
Group error (red)
Bus fault (red)
Active IM with redundancy (yellow)
Supply voltage (green)
Power Supply PS 1 status (green, right-hand PS)
Power Supply PS 2 status (green, left-hand PS)
Operating Instructions, 11/2017, A5E00247483-07
ET 200iSP