Hart Data Records - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Status byte (byte x +4)
The structure of the status byte corresponds to the PROFIBUS-PA profile. With ET 200iSP,
the following status codes of the PROFIBUS-PA profile are used:
Figure 13-12
See also
Analog input modules with HART (4 AI I 2WIRE HART, 4 AI I 4WIRE HART) (Page 353)
Analog output module with HART (4 AO I HART) (Page 354)
13.10.8

HART data records

Prerequisites
You require this information if you want to go beyond the standard applications of STEP 7 and
SIMATIC PDM or use your own configuration tool for HART communication.
Data record interface
The analog modules with HART use data records as the input and output interface:
The mapping of HART commands and HART responses in PROFIBUS-DP data records is
based on the
protocol, refer to
ET 200iSP
Operating Instructions, 11/2017, A5E00247483-07
Status byte
PROFIBUS Profile HART Version 1.0 . For more detailed information on the HART
PROFIBUS DP HART Profile Application Guidelines .
Analog electronic modules
13.10 Basics of HART
315