Add A Remote Controller - Allen-Bradley SoftLogix 5800 User Manual

Chapter 3 Communicate with Devices on an Ethernet Network

Add a Remote Controller

60
If you want this controller to consume tags from another controller via Ethernet,
add the controller to the EtherNet/IP module. The consumer initiates
any actions.
To add a remote controller, build the I/O configuration in this order.
1. Add the devices to the EtherNet/IP port of the controller.
2. For a controller that requires a communication module, add the module
first, and then add the controller.
Rockwell Automation Publication 1789-UM002K-EN-P - January 2015