Allen-Bradley LOGIX 5000 Reference Manual page 477

Equipment Sequence
SOVR instruction ran successfully. The other four codes indicate that the
instruction did not run successfully and provide additional information about the
reason for the instruction failure.
Available Languages
Ladder Diagram
Function Block
This instruction is not available in Function Block.
Structured Text
SOVR(SequenceName,Command,Result)
Operands
The SOVR instruction uses the following operands.
Operand Type
Sequence Name Sequence
Command Command
Result DINT
Affects Math Status Flags
No.
Major/Minor Faults
The SOVR instruction cannot trigger a fault, so there are no fault conditions for
this instruction.
Rockwell Automation Publication 1756-RM006K-EN-P - November 2018
Format Description
Name of the Equipment Equipment Sequence to change to a different state. For
Sequence example, Make_Product_101.
Name of the command Command to send to the Equipment Sequence and change
state. Use one of these commands:
• HOLD
• STOP
• ABORT
Immediate tag For an instruction to return a success or failure code, enter a
DINT tag where the result code is stored. Otherwise, enter 0.
Chapter 8
477