Allen-Bradley LOGIX 5000 Reference Manual page 236

Chapter 1 Process Control Instructions
236
Output Data
Parameters Type
Status3CV3 DINT
InstructFault BOOL
PV1Faulted BOOL
PV2Faulted BOOL
PV1SpanInv BOOL
PV2SpanInv BOOL
SP1ProgInv BOOL
SP2ProgInv BOOL
SP1OperInv BOOL
SP2OperInv BOOL
SP1LimitsInv BOOL
SP2LimitsInv BOOL
SampleTimeTooS BOOL
mall
PV1FactorInv BOOL
PV2FactorInv BOOL
TimingModeInv BOOL
RTSMissed BOOL
RTSTimeInv BOOL
RTSTimeStampInv BOOL
DeltaTInv BOOL
CV1Faulted BOOL
CV2Faulted BOOL
CV3Faulted BOOL
CV1HandFBFaulte BOOL
d
CV2HandFBFaulte BOOL
d
Rockwell Automation Publication 1756-RM006K-EN-P - November 2018
Description
Additional bit mapped CV3 status for the function
block. A value of 0 indicates that no faults have
occurred.
The function block has generated a fault. Indicates
state of bits in Status1, Status2, and Status3CV(n),
where (n) can be 1, 2, or 3.
Process variable PV1 health bad.
Process variable PV2 health bad.
The span of PV1 inValid, PV1EUMax < PV1EUMin.
The span of PV2 inValid, PV2EUMax < PV2EUMin.
SP1Prog < SP1LLimit or > SP1HLimit. Limit value
used for SP1.
SP2Prog < SP2LLimit or > SP2HLimit. Limit value
used for SP2.
SP1Oper < SP1LLimit or > SP1HLimit. Limit value
used for SP1.
SP2Oper < SP2LLimit or > SP2HLimit. Limit value
used for SP2.
Limits inValid: SP1LLimit < PV1EUMin, SP1HLimit
> PV1EUMax, or SP1HLimit < SP1LLimit. If
SP1HLimit < SP1LLimit, then limit value by using
SP1LLimit.
Limits inValid: SP2LLimit < PV2EUMin, SP2HLimit
> PV2EUMax, or SP2HLimit < SP2LLimit. If
SP2HLimit < SP2LLimit, then limit value by using
SP2LLimit.
Model DeadTime / DeltaT must be less than or
equal to 200.
Entered value for Factor1 < 0.
Entered value for Factor2 < 0.
Entered TimingMode inValid. If the current mode is
not Override or Hand then set to Manual mode.
Only used when in Real Time Sampling mode. Is
TRUE when ABS(DeltaT – RTSTime) > 1
millisecond.
Entered RTSTime inValid.
RTSTimeStamp inValid. If the current mode is not
Override or Hand, then set to Manual mode.
DeltaT inValid. If the current mode is not Override
or Hand then set to Manual mode.
Control variable CV1 health bad.
Control variable CV2 health bad.
Control variable CV3 health bad.
CV1 HandFB value health bad.
CV2 HandFB value health bad.
Values
Bit 0 of Status1
Bit 1 of Status1
Bit 2 of Status1
Bit 3 of Status1
Bit 4 of Status1
Bit 5 of Status1
Bit 6 of Status1
Bit 7 of Status1
Bit 8 of Status1
Bit 9 of Status1
Bit 10 of Status1
Bit 11 of Status1
Bit 12 of Status1
Bit 13 of Status1
Bit 27 of Status2
Bit 28 of Status2.
Bit 29 of Status2.
Bit 30 of Status2.
Bit 31 of Status2.
Bit 0 of Status3CV1
Bit 0 of Status3CV2
Bit 0 of Status3CV3
Bit 1 of Status3CV1
Bit 1 of Status3CV2