Allen-Bradley LOGIX 5000 Reference Manual page 169

Process Control Instructions
CV3WindupHOut BOOL
CV1WindupLOut BOOL
CV2WindupLOut BOOL
CV3WindupLOut BOOL
ProgOper BOOL
CV1Auto BOOL
CV2Auto BOOL
CV2Auto BOOL
CV1Manual BOOL
CV2Manual BOOL
CV3Manual BOOL
CV1Override BOOL
CV2Override BOOL
CV3Override BOOL
Rockwell Automation Publication 1756-RM006K-EN-P - November 2018
CV3 Windup high indicator.
TRUE when either a SP high or CV3
high/low limit has been reached.
This signal will typically be used by
the WindupHIn input to limit the
windup of the CV3 output on a
primary loop.
CV1 Windup low indicator.
TRUE when either a SP or CV1
high/low limit has been reached.
This signal will typically be used by
the WindupLIn input to limit the
windup of the CV1 output on a
primary loop.
CV2 Windup low indicator.
TRUE when either a SP or CV2
high/low limit has been reached.
This signal will typically be used by
the WindupLIn input to limit the
windup of the CV2 output on a
primary loop.
CV3 Windup low indicator.
TRUE when either a SP or CV3
high/low limit has been reached.
This signal will typically be used by
the WindupLIn input to limit the
windup of the CV3 output on a
primary loop.
Program/Operator control indicator.
TRUE when in Program control.
FALSE when in Operator control.
Auto mode indicator for CV1. TRUE
when CV1 in the Auto mode.
Auto mode indicator for CV2. TRUE
when CV2 in the Auto mode.
Auto mode indicator for CV3. TRUE
when CV3 in the Auto mode.
Manual mode indicator CV1. TRUE
when CV1 in the Manual mode.
Manual mode indicator CV2. TRUE
when CV2 in the Manual mode.
Manual mode indicator CV3. TRUE
when CV3 in the Manual mode.
Override mode indicator for CV1.
TRUE when CV1 in the Override
mode.
Override mode indicator for CV2.
TRUE when CV2 in the Override
mode.
Override mode indicator for CV3.
TRUE when CV3 in the Override
mode.
Chapter 1
169