Allen-Bradley LOGIX 5000 Reference Manual page 449

Equipment Phase Instructions
Number Description
When FactoryTalk Batch software has new parameters for an equipment phase, it sets
the NewInputParameters bit for the phase.
After downloading the parameters, use the PRNP instruction to clear the bit.
Available Languages
Ladder Diagram
Function Block
This instruction is not available in function block.
Structured Text
PRNP ( );
Operands
Ladder Diagram
None
Structured Text
None
Enter the parentheses ( ) after the instruction mnemonic, even though there are no
operands.
Affects Math Status Flags
No
Major/Minor Faults
None. See Index Through Arrays for operand-related faults.
Execution
Condition/State
Prescan
Postscan
EnableIn is false
EnableIn is true
Rockwell Automation Publication 1756-RM006K-EN-P - November 2018
Action Taken
No action taken.
No action taken.
No action taken.
The instruction executes.
Chapter 7
449