Figure 40: User Exec Mode Prompt - Allied Telesis AT-IE510-28GSX Installation Manual

Chapter 7: Configuring the Switch for Stand-alone Operations
You are prompted for a user name and password.
5. If this is the initial management session of the switch, enter "manager"
as the user name and "friend" as the password. The user name and
password are case sensitive.
The local management session starts when the User Exec mode
prompt, shown in Figure 40 is displayed.
awplus>
Figure 40. User Exec Mode Prompt
The User Exec mode is the first level in the command mode interface.
For complete information on the modes and commands, refer to the
AT-IE510-28GSX Command Reference on AlliedTelesis.com.
82