Data Menu; Serial Port Screens - Raven DCS 410 Installation & Service Manual

DATA MENU

DEFINITION OF DATA MENU KEYS:
Depressing this key displays the selected Data Menu category in the
LIQ display.
Depressing this key again increments through the Data Menu categories
("SPr", "GPS", "dAtE", etc...) in the LIQ display.
Depressing this key (after desired category is shown in LIQ display)
advances up through desired features within a category.
is shown in the left DATA display.
Depressing this key (after desired category is shown in LIQ display)
advances down through desired features within a category.
feature is shown in the left DATA display.

SERIAL PORT SCREENS

CONSOLE DATA PRINTOUT
a) LIQ display will show "SPr".
DATA display will show "CAL". To print calibration numbers, depress
b) Depress
left DATA display will show "Prn".
To print beginning totals, depress
c) Depress
left DATA display will show "Prn".
To print ending totals, depress
DATA display; if a beginning total or calibration numbers printout is
required, depress
CAL".
NOTE: If "End" is printed and a CAL number has been changed, a warning will
be printed (print CAL to see which number has changed).
d) Depress
Left DATA display will show "Prn".
to advance to print begin.
to advance to print end.
to advance the right DATA display to "bEGn" or
to advance to TRUCK NUMBER.
20
Selected feature
LIQ display will show "SPr".
Right DATA display will show "bEGn".
.
LIQ display will show "SPr".
Right DATA display will show "End".
. While "End" is in the right
Selected
Right
.