Table of Contents
Advertisement
Chapter 2 New for OEM7 – Firmware
OEM6
RTCM Data Logs
SATVIS
2.3.4 New Logs
The table below lists the logs added in OEM7.
OEM7
INSCALSTATUS
INSCONFIG
INSSTDEV
INSSTDEVS
INSUPDATESTATUS
ITBANDPASSBANK
ITFILTTABLE
ITPROGFILTBANK
ITPSDFINAL
J1939STATUS
OEM6 to OEM7 Integration Guide v1
Deleted the logs: RTCM1, RTCM3, RTCM9, RTCM15, RTCM16, RTCM16T,
RTCM1819,RTCM2021, RTCM22, RTCM23, RTCM24, RTCM31, RTCM32,
RTCM36, RTCM36T, RTCM59, RTCM59GLO, RTCMOMNI1
Deleted
Table 29: New Logs in OEM7
Provides the status and estimated values for the currently running offset
calibration.
See the INSCALSTATUS log on page 91
Provides the current configuration of the SPAN system.
See the INSCONFIG log on page 93
Provides the INS PVA standard deviations.
See the INSSTDEV log on page 96
Provides the INS PVA standard deviations and has a short header.
See the INSSTDEVS log on page 98
Provides the most recent INS update information
See the INSUPDATESTATUS log on page 100
Provides the allowable bandpass filter configurations
Part of the Interference Toolkit feature
See the ITBANDPASSBANK log on page 102
Provides the filter configuration for each frequency
See the ITFILTTABLE log on page 104
Provides the allowable filter configurations
See the ITPROGFILTBANK log on page 106
Provides the processed power spectral density information
See the ITPSDFINAL log on page 109
Provides the status of the J1939 node
See the J1939STATUS log on page 112
OEM7
Description
80
Advertisement
Table of Contents
