Forceglol2Code - Novatel OEM6 Integration Manual

Chapter 2 New for OEM7 – Firmware

2.2.10 FORCEGLOL2CODE

Forces receiver to track GLONASS satellite L2 P or L2 C/A code
Platform: OEM729, OEM719, OEM7700
This command is used to force the receiver to track GLONASS satellite L2 P-code or L2 C/A code.
This command has no effect if the channel configuration contains both GLONASS L2 P and L2 C/A
channels.
Message ID: 1217
Abbreviated ASCII Syntax:
FORCEGLOL2CODE L2type
Factory Default:
FORCEGLOL2CODE default
ASCII Example:
FORCEGLOL2CODE p
Field
Field
Type
FORCEGLO
1 L2CODE
header
2 L2type
Binary
The following table lists which L2 signal is tracked based on the channel configuration and the
setting used for the L2type parameter.
OEM6 to OEM7 Integration Guide v1
ASCII Binary
Value Value
- -
See Table 11:
GLONASS L2 Code
Type below
Table 11: GLONASS L2 Code Type
ASCII
1 P L2 P-code or L2 Precise code
2 C L2 C/A code or L2 Coarse/Acquisition code
3 DEFAULT Set to channel default
Description
Command header. See
Messages for more
information.
GLONASS L2 code type
Description
Binary Binary
Format
Bytes Offset
- H 0
Enum 4 H
30