Pppreset - Novatel OEM6 Integration Manual

Chapter 2 New for OEM7 – Firmware

2.2.25 PPPRESET

Reset the PPP filter
Platform: OEM729, OEM719, OEM7700
This command resets the PPP filter. After a reset, the PPP filter is restored to its initial state and
PPP convergence will start over.
If deletion of the NVM-saved PPP seed information is also required, then a PPPSEED
CLEAR command must be applied before the PPPRESET command. See the PPPSEED
command.
Message ID: 1542
Abbreviated ASCII Syntax:
PPPRESET [Option]
ASCII Example :
PPPRESET
Field ASCII
Field
Type
PPPRESET
1
header
2 Option
OEM6 to OEM7 Integration Guide v1
Binary
Value Value
Command header. See
- - Messages for more
information.
Reset the PPP filter.
FILTER 1
This is an optional parameter.
(default = FILTER)
Description
Binary Binary Binary
Bytes Format Offset
- H 0
4 Enum H
60