Nvmuserdata - Novatel OEM6 Integration Manual

Chapter 2 New for OEM7 – Firmware

2.2.21 NVMUSERDATA

Write User Data to NVM
Platform: OEM729, OEM719, OEM7700
This command writes the data provided in the data array to NVM. This data can be retrieved by
issuing the command LOG NVMUSERDATA.
The user data is maintained through power cycles and a standard FRESET command. To clear
the user data, use the FRESET USERDATA command.
The user data may be deleted if the NVMRESTORE command is sent. NVMRESTORE
should be used with caution and is meant for use only in the event of a NVM receiver
error.
Abbreviated ASCII Syntax:
Not applicable
Field
Field Type
NVMUSERDATA
1
header
Number of
2
Bytes
3 Data Array
OEM6 to OEM7 Integration Guide v1
Binary
Description
Value
Command header. See
-
Messages for more information.
Number of bytes of data to
-
follow
User input data up to a
-
maximum of 2000 bytes
Binary Binary Binary
Format Bytes
- H 0
Ulong 4 H
Uchar 2000 H+4
Offset
55