Oem719 Data Communication Specifications - Novatel OEM6 Integration Manual

Chapter 4 Receiver Technical Specifications

4.1.4 OEM719 Data Communication Specifications

Electrical format
1
Data rates
Signals supported
Electrostatic discharge
protection
Electrical format
1
Data rates
Signals supported
Electrostatic discharge
protection
Electrical format
1
Data rates
Signals supported
Electrostatic discharge
protection
Electrical format
Data rates
1
Data rates higher than 115200 bit/s are not supported by standard PC hardware. Special computer hardware
may be required for higher rates, including 230400 bit/s and 460800 bit/s.
2
COM3 is disabled by default.
3
Event2 is enabled by default, but is multiplexed with CAN1. CAN functionality must be disabled for Event2 to
work properly.
OEM6 to OEM7 Integration Guide v1
Table 81: OEM719 Data Communication Interfaces
LVCMOS
2400, 4800, 9600 (default), 19200, 38400, 57600, 115200, 230400 or
460800 bit/s.
COM1_Tx, COM1_Rx
No
LVCMOS
2400, 4800, 9600 (default), 19200, 38400, 57600, 115200, 230400 or
460800 bit/s.
COM2_Tx, COM2_Rx
No
2 , 3
LVCMOS
2400, 4800, 9600 (default), 19200, 38400, 57600, 115200, 230400 or
460800 bit/s.
COM3_Tx, COM3_Rx
No
LVCMOS (requires external CAN transceiver)
250, 500 or 1000 kb/s
CAN Bus throughput is determined by slowest device on the bus
COM1
COM2
COM3
CAN Bus
186