Saveusbconfig - Novatel OEM6 Integration Manual

Chapter 2 New for OEM7 – Firmware

2.2.29 SAVEUSBCONFIG

Save the configuration data for the USB ports
Platform: OEM729, OEM719, OEM7700
Saving the configuration data for all USB ports allows the ports to start automatically at boot
time and be configured with the expected USB operating modes and speeds. The
SAVEUSBCONFIG command saves the USB port configuration entered using the USBCONFIG
command (see page 74). The USBCONFIG command must be invoked before the
SAVEUSBCONFIG command is used.
The configuration data that is saved will survive a RESET command and FRESET command. To
clear the USB port configuration data, use a FRESET USBCONFIG command. It is not neces-
sary to issue the SAVECONFIG command to save the USB interface configuration data. In fact,
if SAVECONFIG is used to save the USBCONFIG commands, the configuration saved by
SAVEUSBCONFIG will take precedence over the SAVECONFIG configuration.
Message ID: 1960
Abbreviated ASCII Syntax:
SAVEUSBCONFIG
ASCII Example:
SAVEUSBCONFIG
Field Field Type
SAVEUSBCONFIG
1
header
OEM6 to OEM7 Integration Guide v1
ASCII Binary
Value Value
Command header. See
- - Messages for more
information.
Description Format
-
Binary Binary
Bytes Offset
H 0
65