J1939Status - Novatel OEM6 Integration Manual

Chapter 2 New for OEM7 – Firmware

2.3.16 J1939STATUS

Status of CAN J1939 Node
Platform: OEM729, OEM719, OEM7700
This logs reports the status of J1939 node, specifically J1939 Address Claim function (initiated
using the J1939CONFIG command (see page 50)).
This log displays the status only for nodes that have been set.
Message ID: 1907
Log Type: Asynch
Recommended Input:
LOG J1939STATUSA ONCHANGED
ASCII Examples:
#J1939STATUSA,COM1,1,81.0,UNKNOWN,0,0.000,02004020,e9ce,32768;NODE1,DI
SABLED,0,FE*637c7f
#J1939STATUSA,COM1,0,81.0,UNKNOWN,0,0.000,02004020,e9ce,32768;NODE2,DI
SABLED,0,FE*c41af5ee
Field Field Type
J1939STATUS
1
header
2 node
3 status
4 count
5 address
6 xxxx
7 [CR][LF]
OEM6 to OEM7 Integration Guide v1
Description
Log header. See Messages for more
information.
J1939 Node. The node can be either NODE1
or NODE2.
Node status. See Table 39: Node Status on
the next page
Number of attempts that were made to claim
address.
This will be 1 when the preferred address is
used and may be more if the alternate range
is used.
Claimed CAN Address.
0xFE (NULL address) if the address could not
be negotiated.
32-bit CRC (ASCII and Binary only)
Sentence Terminator (ASCII only)
Binary Binary
Format
Bytes Offset
- H 0
Enum 4 H
Enum 4 H+4
Ulong 4 H+8
Uchar 1 H+12
Hex 4 H+13
- - -
112