Preparation; Inserting The Batteries - Konica Minolta CR-400 Instruction Manual

Preparation

Inserting the Batteries

To supply power to the instrument, the AC adapter (AC-A305) or 4 AAA size batteries must be used.
Use either the AC adapter or batteries, according to which suits your application.
Do not dispose of batteries in fire, short their terminals, apply heat to them, or disassemble
them. Also, do not recharge them. Doing so may cause explosion or heat generation, resulting
in fire or injury.
WARNING
Do not use batteries other than those specified by KONICA MINOLTA. When installing
batteries in the instrument, make sure that they are correctly oriented according to the (+) and
(-) marks. Failure to adhere to these instructions may cause the batteries to explode or leakage
electrolytes, resulting in fire, injury, or air pollution.
CAUTION
• If you are not going to use the instrument for more than two weeks, make sure that the batteries are
removed. If the batteries are left in the instrument for long periods of time, battery electrolyte may
leak and damage the instrument.
• Do not touch the terminals inside the battery chamber. Doing so may result in breakdown of the
instrument.
Notes on Use
• Since a low temperature reduces the battery performance, the number of measurements and the
printing speed and darkness of the characters also deteriorates. We therefore recommend using
lithium or nickel metal-hydride batteries which are good in low temperatures.
Recommended batteries
23