Deleting The User Calibration Channels - Konica Minolta CR-400 Instruction Manual

User Calibration
• The multi-calibration setting screen appears.
Item
ALL CHANNELS:
WHITE CAL. TILE: When user calibration is not performed.
3 Press the Measure/Enter key
Ch**:
4 Move the cursor using the
calibration channel.
• Once manual select calibration settings are complete, the display returns to the measurement
screen.
Since settings for calibration channel made in manual select calibration are kept even if the
5 Press the Measure/Enter key
power is turned OFF (O), it is important to check the calibration channel following steps 1 to
3 above in the following situations.
• When changing the calibration channel settings to measure a different color
• When the instrument has been left unused for long periods of time
<Deleting the User Calibration Channels>
The user calibration channel can be deleted as follows.
138
Multi-calibration is set.
(See P.86 "White Calibration")
.
Manual select calibration is set
(See P.137 "Setting the Manual Select
Calibration")
key to and select a
.
5
1
Selection screen
2,4,6
3,7,8