Box tolerance and ∆E
This judges both box tolerance and ∆E.
Selecting the limit value in P.115 displays the [limit value] selection screen.
5,7
[Operating Procedure]
Use the
key to select a color difference target
1
color.
• The tolerance type screen appears.
Press the Measure/Enter key
2
Select the "BOX & ∆E*" as the tolerance type.
3
• The limit value setting screen will appear.
• If color difference tolerance and ∆E are already set, go to step
6 as the set color difference tolerance data is displayed.
Press the Measure/Enter key
4
.
.
1,3,5,7
2,4,6,8
Selection screen
Tolerance type screen
Setting screen
123