Konica Minolta CR-400 Instruction Manual page 91

After Mesurement
• Pressing the Color Space key
P.78 "Selecting the Color Space")
• Pressing the Color Space key
Changing the Display")
• Measured data is automatically stored.
If you do not wish to store data, press the Delete/Undo key
If you mistakenly delete data you wished to keep, press the Delete/Undo key
the latest deleted data is restored.
Note, however, that if new measurement data replaces the latest deleted data, that data is no
longer restorable, since the new data is stored in its place.
• Up to 2000 measurement data sets can be stored.
- When data protection is set to OFF and data quantity exceeds 2000 items, the oldest page
that contains measurement data will be deleted, and a data storing area will be secured.
(If the page to be deleted is page 0, the relevant page remains, but the measurement data
on this page will be deleted.) If there is no page that contains measurement data other
than the current page, the oldest data on the current page will be overwritten.
- When data protection is set to ON, a measurement error occurs, and the "Data Memory
Full" error message appears.
[Printout (example)]
Page number
Measurement
data number
* Press the Print/Paper Feed key
converts the measurement data to other color spaces. (See
changes the screen display. (See P.81 "Screen Display and
Illuminant
No0002 data
deleted
No0002 data
undone
anytime you want to print out the data displayed in the LCD.
New data measured
as No0003
to delete the latest data.
again and
[Screen (example)]
[Setting conditions]
Select L*a*b* color
space and absolute
display
89