Konica Minolta CR-400 Instruction Manual page 41

• After measurement, pressing the Color Space key
spaces. (See P.31 " Selecting the Color Space".)
• If a color difference target color is set you can display color difference data. (See P.30 " Screen
Display".)
• Measured data is automatically stored.
If you do not wish to store data, press the Delete/Undo key
If you mistakenly delete data you wished to keep, press the Delete/Undo key
the latest deleted data is restored.
Note, however, that if new measurement data replaces the latest deleted data, that data is no
longer restorable, since the new data is stored in its place.
• Up to 1000 measurement data sets can be stored.
Oldest data is overwritten if this limit is exceeded.
converts the measurement data to other color
to delete the latest data.
again and
39