Before Use; Standard Accessories - Konica Minolta CR-400 Instruction Manual

Before Use

Standard Accessories

Standard accessories are available with this instrument.
In the text, "Head" indicates the Measuring Head and "DP" indicates the Data Processor.
Note: The instrument and accessories may differ from how they appear in illustrations.
White Calibration Plate
CR-A43 (for CR-400 Head)
CR-A44 (for CR-410 Head)
Used during white calibration.
Back side of the cover lists calibration data.
Protective Cap
CR-A72 (for CR-400 Head)
CR-A104 (for CR-410 Head)
Attaches to the tip of the light projection tube of the
measuring head to protect the optics.
Roll Paper - 1 roll
(for data processor)
Thermal paper for the printer.
RS-232C Cable (for connecting the Head to the DP)
CR-A101 (for data processor)
Used to connect the measuring head to the data pro-
cessor. (for this instrument only 13-pin specification,
1.3m long)
AC Adapter
AC-A305
Supplies power from an AC outlet to the instrument.
Input: 100-240 V
Output: Voltage 5 V
Plug: Center negative
Wrist Strap
CR-A73 (for measuring head)
Attaches to the measuring head.
AAA Size Battery (x4)
(for measuring head)
AA Size Battery (x4)
(for data processor)
50/60 Hz 24-38 VA
2.0 A
11