Konica Minolta CR-400 Instruction Manual page 132

SIP/SOP Connections
• The index set screen appears.
4 Press the Index Set key
screen.
5 Press the
• The remote mode screen appears.
• Pressing the Escape key
6 Press the Measure/Enter key
To disconnect the included cable, first turn OFF
power to the measuring head and data proces-
sor, then while pressing and holding the lock re-
lease button on the connector, pull the connec-
tor out.
If the lock is not released and remove it by force,
the connector may be damaged.
130
4
while in the measurement
key to change to page 2/2.
returns to the measurement screen.
.
5
6
Index set screen (1/2)
Index set screen (2/2)
Remote mode screen
Lock release
button