Function Guide - Konica Minolta CR-400 Instruction Manual

Function Guide

The Measuring Head has the following functions available depending on how it is used.
1) Functions surrounded by
(See P.21 "Chapter 1 Measuring Head I".)
2) Other functions can be set using the Data Processor when using the Measuring Head separately
from the Data Processor.
• See P.58 "Data Processor: Function guide" for details on functions available when connected to the
Data Processor.
See P.35 "Measurement" for details on color measurement and color difference measurement.
Index
Initial setting
Calibration
Display
Color difference
target colors
Processing stored data
Basic settings
Option setting
Other settings
• (2) above can be set using the optional CR-400 utility software CR-S4w and the Color Management
Software SpectraMagic™ NX CM-S100w as well. See the software manuals for details.
• User index displays can also be registered from the optional software. (See P.48.)
22
in the following table can be used with the Measuring Head alone.
Initial setting Initialization
Language mode Language selection
White calibration Entry of calibration values
Change display Absolute values/Color difference display
Change display
Absolute value display
Color difference display
Pass/Caution/Fail display
Color space Color space selection
Color difference Target color setting (measurement value entry)
target colors Target color selection
Target color setting (value entry)
Target color character string
Delete one target color/all target colors
Overwrite confirm
Data list Selection 1 data retrieval
Deleting/Undoing the latest data
Backlight
Setting
PC mode
Average measurement
Data protection
Illuminant
Color space limit Setting
CMC parameter
Clock
Data transfer
Multi-calibration
LCD contrast
Setting
Baud rate setting
Function Reference page
56
36
30
54
55
31
40
46
55
28
48
28
49
54
56
56
54
28