Deleting The Stored Data; Deleting/Undoing The Latest Data; Deleting/Undoing The Selected Data - Konica Minolta CR-400 Instruction Manual

Deleting the Stored Data

There are four ways of deleting data: only the latest data, only the selected 1 data, by page, and all data.
The operating procedure is described below.
<Deleting/Undoing the Latest Data>
• Only the latest data is deleted and the display returns to the previous measurement screen.
• Pressing the Delete/Undo key once more restores the latest data.
Note, however, that if new measurement data replaces the most recently deleted data, that data
will no longer be restorable, since the new data will be stored in its place. If you change the
[Operating Procedure]
page after deleting the latest data, the deleted data cannot be restored.
<Deleting/Undoing the Selected Data>
Press the Delete/Undo key
1
ment screen.
5
1
• The data list screen appears.
[Operating Procedure]
Press the Data List key
1
screen.
Select a page using
2
112
1
while in the measure-
while in the measurement
key.
2,4
3
List screen