Cmc Parameter Setting - Konica Minolta CR-400 Instruction Manual

<CMC Parameter Setting>
The CMC parameter can be set anywhere in the range of 0.1 to 9.9.
See P.79 "Color Space and Changing the Display" and P.80 "Color Space and Color Difference Set-
ting" for details on setting conditions.
After steps 1 to 3 on P.74 "Setting a Displayed Color Limit", perform following steps below.
1
[Operating Procedure]
Select the CMC parameter settings using the
4
• The cursor is displayed below the CMC parameter setting.
Input range: 0.1 - 9.9
5 Press the Measure/Enter key
Set the CMC parameter using the
6
• Pressing the Escape key
meric pad.
Once the setting is complete, press the Measure/En-
7
ter key to return to color space selection in the
displayed color limit screen.
.
key or the nu-
returns to the previous screen.
6
2,4
3,5,7
key. Displayed color limit
screen (Page 1 of 2)
75