Konica Minolta CR-400 Instruction Manual page 47

• Measurement is done and measurement data is displayed.
Do not move the measuring head during measurement.
Press the measurement button of the measuring head
7
after making sure the ready lamp is ON.
• Repeat steps from 3 to 7.
• After measurement, pressing the Color Space key
spaces. (See P.31 " Selecting the Color Space".)
• Measured data is automatically stored.
If you do not wish to store data, press the Delete/Undo key
If you mistakenly delete data you wished to keep, press the Delete/Undo key
the latest deleted data is restored.
Note, however, that if new measurement data replaces the latest deleted data, that data is no
longer restorable, since the new data is stored in its place.
• Up to 1000 measurement data sets can be stored.
Oldest data is overwritten if this limit is exceeded.
converts the measurement data to other color
to delete the latest data.
Mesurement data
again and
45