Konica Minolta CR-400 Instruction Manual page 15

Pivoting Base
CR-A12 (for CR-400 Head)
Switching the light projection tube for
the CR-400 measuring head to the CR-
A33c and attaching it to the pivoting
base CR-A12 allows more stable mea-
surement as well as more accurate de-
termining of the measuring point.
Granular Attachment
CR-A50
This allows easy, reliable, and accurate measurement of pow-
der, grain, or paste objects.
CR-400 Utility Software CR-S4w
(CD-ROM)
This software uploads measurement data, uploads and down-
loads of user index, converts to Excel format, and helps tweak
and re-use measurement data.
Ver 1.0 or later is required for connection to this instrument.
Excel is a trademark of Microsoft Corporation (USA) registered in US and
Color Management Software
other countries.
SpectraMagic™ NX CM-S100w
®
(CD-ROM)
This software allows for interactive communication between the
Chromameter and a PC and facilitates remote control of this instru-
ment as well as data input/output. Data processing and file manage-
ment can be completed using a PC with this software installed.
USB-Serial Converter Cable
CR-A105
Used to connect the instrument to a PC over USB.
* Included amongst the standard accessories when the measur-
ing head and data processor are purchased as a set.
RS-232C Cable (for PC)
CR-A102
Used to connect the measuring head or data processor to a
PC.(PC connector D-sub 9 pins, 2m long)
Color Plates (White, black, and 12 other colors)
Used for simple diagnosis of instrument measurement perfor-
mance (instrumental errors and repeatability).
CR-A33c accessory
13