Safety Precautions - Konica Minolta CR-400 Instruction Manual

To ensure correct use of this instrument, read the following points carefully and adhere to them. After
you have read this manual, keep it in a safe place where it can be referred to anytime a question arises.
Do not use the instrument in places where
flammable or combustible gases (gasoline
etc.) are present. Doing so may cause fire.
Always use the AC adapter supplied as
a standard accessory or the optional AC
adapter, and connect it to an AC outlet
WARNING
of the rated voltage and frequency. If the
AC adapters other than those specified
by KONICA MINOLTA are used, this
may result in damage to the unit, fire or
electric shock.
If the instrument will not be used for a long
time, disconnect the AC adapter from the
AC outlet. Accumulated dirt or water on
the prongs of the AC adapter's plug may
cause a fire and should be removed.
Be careful not to spill liquids or drop metal-
lic objects into the instrument or AC adapter.
Doing so may cause a fire or electric shock.
Should liquid or metal objects enter the
instrument, turn the power OFF immedi-
ately, disconnect the AC adapter from the
AC outlet, and contact the nearest Konica
Minolta authorized service facility.
Should liquid leak from batteries and con-
tact to eye, wash liquid off with clean wa-
ter without rubbing eyes and immediately
seek for medical professional's advice.
In case liquid contacts with hand or clothes,
wipe it off with plenty of water. Avoid fur-
ther use of such unit.
Insert the plugs of the AC adapter se-
curely and fully into the connections so
that blades and pins are not exposed.
Incomplete connections may cause fire
or electric shock.

Safety Precautions

(Failure to adhere to the following points may result in death or
serious injury.)
Do not disassemble or modify the in-
strument or the AC adapter. Doing so
may cause a fire or electric shock.
The instrument should not be operated if it is
damaged or AC adapter is damaged, or if
smoke or odd smells occur. Doing so may re-
sult in a fire. In such situations, turn the power
OFF immediately, disconnect the AC adapter
from the AC outlet (or remove the batteries if
they are used) and contact the nearest Konica
Minolta authorized service facility.
Do not connect or disconnect the AC
adapter with wet hands. Doing so may
cause electric shock.
Do not dispose of batteries in fire, short
their terminals, apply heat to them, or
disassemble them. Also, do not recharge
them. Doing so may cause explosion or
heat generation, resulting in fire or in-
jury.
Insulate battery contact with such ob-
ject as tape in disposing of batteries.
Contact to other metal object may cause
explosion or fire. Follow local regula-
tion for proper disposal or recycling of
batteries.
Do not unreasonably bend, twist or pull
cables.
Also, do not place heavy objects on
cables or otherwise damage or modify
cables.
Abusive handling may damage cables,
resulting in fire or electric shock.
1