Setting Language Mode - Konica Minolta CR-400 Instruction Manual

Setting Language Mode

The instrument allows the user to select from six language modes.
1) Japanese 2) English 3) German 4) French 5) Spanish 6) Italian
If the language settings in the measuring head and the data processor are different, the setting for the
data processor is reflected to the measuring head.
• The language selection screen appears.
[Operating Procedure]
1 Turn the power ON ( I ) while pressing the Enter key
at the same time.
2 Select the language using the
• Once selection of language is complete, the start-up screen ap-
pears.
When shipped from the factory, the language mode is set to En-
glish. If another language is selected and the internal memory
backup battery dies, the language mode will revert to English. The
memory backup battery will die if the instrument is not supplied
Press the Enter key
3 with power for ten months.
70
1
key.
.
2
3
Language selection screen
Start-up screen
,